So you may have seen my post about having trouble starting with the exhaust on. Well after about a week of messing with the thing I decided to re-check my compression and it was 60psi. WTF! So I am going to rebuild the top-end. Plus I have a broken reed. I am thinking about just sending my cylinder off to get bored and sent back with a matching piston (for around $150). But would rather go vito 240 big bore. Then get the vforce 3 reeds. Not sure since funds are limited. I need a new clutch kit w/ the basket too. Wadya guys think? Maybe I'll get it bored to 68mm (currently 66.5) then just get the vforce reeds and some new exhaust plus a nice clutch basket w/ clutch kit.
