Good morning all. I recently got my hands on an ancient (1988) blaster for $300. I could get it to start but it will not drive due to the low power.
So i put a complete new top end on it still wont run properly.
Just to clearify it does have a new weisco crank, like i said new top end, working clutch and there is spark.
Im wondering if tors could be the problem. The wires going to the carb is cut and connected. But other than that i have a stock carb.
I guess does anyone have any thoughts?
Fyi before i redid the top end it would idle nicely then it would make a clunk noise then want to stall.
Hmn my choke isnt in the greatest condition could that cause this?
So i put a complete new top end on it still wont run properly.
Just to clearify it does have a new weisco crank, like i said new top end, working clutch and there is spark.
Im wondering if tors could be the problem. The wires going to the carb is cut and connected. But other than that i have a stock carb.
I guess does anyone have any thoughts?
Fyi before i redid the top end it would idle nicely then it would make a clunk noise then want to stall.
Hmn my choke isnt in the greatest condition could that cause this?
Last edited: