Carburetor flooding and leaking gas

[Phillip Caicedo]

so I have a 98 Blaster with a flooding/leaking carburetor and I want to know what's happening. there is a 210 as the main jet. Pilot jet don't know. I have pictures of the carb for reference. I'm thinking it might just be the float height. Not sure though. new gaskets and everything? Help I'm clueless on this one

 

[Phillip Caicedo]

picture file is too big sorry about that

 

[Slydog]

picture file is too big sorry about that

Have to resize pictures. Cell phone pics are to big. Google play ect.. Has free app's.
Flooding is ussualy caused by improper float hieght. Or dirty float needle and seat if it sat around for awhile. Clean needle and seat good.

 

[Phillip Caicedo]

Thanks! Will check all of that.

float height is 20-21.5 mm for the stock Mikuni right?

 

[Larry's Shee]

https://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/

Try this first, if that doesn't work you'll need new seat, valve,
seat O-ring. Be sure to follow directions to set height EXACTLY

 

[Phillip Caicedo]

Thanks! They just needed adjusting they were way off. And the seat was super dirty. Probably why it was flooding. I'll adjust the floats once I get a replacement silencer and reeds.

Thanks for the help!