Carb

[Rocky Lominario]

looking for a slightly bigger carb for my stock 01 blaster it has power reefs but that’s it.
Trying to figure out a carb size plus my original one is hash.

 

[Blaner]

Im sure you mean Reed valves. your stock carb is a Mikuni 26mm. apparently the PWK28 is a good swap for a not so modded bike. Otherwise you need to look for a 35mm Keihin or so. However, a well jetted stock carb does a fine job.

 

[Rocky Lominario]

Im sure you mean Reed valves. your stock carb is a Mikuni 26mm. apparently the PWK28 is a good swap for a not so modded bike. Otherwise you need to look for a 35mm Keihin or so. However, a well jetted stock carb does a fine job.

So you think I should maybe just reject it?

 

[Larry's Shee]

You re-jet only if you change amount of air going in or out of the engine. Air cleaner, lid ,,,, snorkel, expansion chamber, porting.
28mm on a bone stock is largest size you want.

I have a ported, reeds, air cleaner, Fat Bastard pipe, run stock carb and love it.

 

[Larry's Shee]

Why do you think it needs jetting?

 

[Rocky Lominario]

I have boyseen power reeds that’s it for now but I think my carb is no good in general my choke is bent and I think it leaks. But also I wanna get rid of the tors box on top of my carb.
Will rejeting help?
I have the reeds and no box lid other then that all stock.