Carb
- Thread starter Kris
- Start date
A Clymers repair manual or the PDF on here will get you all the STOCK settings. Yo failed to mention ANY modifications.
As Larry mentioned, you didn’t mention any modifications, but assuming you mean adjusting your pilot air screw, this post should help from stock to modded, try this: https://www.blasterforum.com/threads/adjusting-your-airscrew-pilot-jet.51060/
Before you go ahead and adjust that, make sure you adjust your float height correctly, here’s another post by that same user teaching you how to do that! https://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/ now this post only goes into detail with Keihin and stock carbs for blasters, so if yours isn’t on this post, check your owners/repair manual on the correct float height, if you do not own one, there should be a copy on this forum you can find! Hopefully this helps! I’m no professional but this is what helped me!
Thank you! I learned from you and Awk! I think I’m getting the hang of this! Lol!You're catching on Caleb !! Good job. Good job with the links also
Similar threads
