Carb help

[Zbskater400]

I'm almost done my build all I need is a carburetor aND was wondering if the keihin 34 mm Pj would be a good to carb to buy the motor is a 3 mil stroker and bored. Not sure if it matters and I have a fmf header and toomey silencer with lid off I know I'll prob have to jet it. But what it be a good carb ?

 

[Awk08]

stick with the stock carb, it's the easiest to tune and will provide all that engine/mods require

 

[Zbskater400]

stick with the stock carb, it's the easiest to tune and will provide all that engine/mods require

The thing is I don't even have a carb at all lol that's why I was asking if I should just get that one or buy a stock one off eBay

 

[jus_me]

A stock carb will work best with the FMF.. Also like stated it is easy to tune and there is a boat load of info on doing so in the forum. Plus with a bigger carb you will need to buy a larger intake, mess with jetting more (until once set), lose some bottom end, etc.. Granted there are uses for a larger carb but they work best on more built higher rpm motors. << heck the Stock carb even works well on semi built motors also.