Blaster wont start still

[bkblaster]

i have a yamaha blaster that wont run we drained the carb and took the old plug out it looked like it had something lodged in it so we got a new plug and it ran for a bit then it died again so we tool the new plug out and there was peices of metal lodged in the plug again what does this mean and now it wont run and the kick start wont kick

 

[super noober]

sorry man but it sounds like your top end is fried. take your head off and get a good look inside the cylinder. anything you do will just make it worse so stop trying to kick it over.

 

[03blasteryfs03]

yup are they like metal shaveings???

 

[bkblaster]

ya there metal shavings and it needs a new piston

 

[custom2stroke]

what number of plug are you using? sounds like it could be a too hot of a plug? I see also you have a shaved head how much was taken off? could also be caused from predetonation.

 

[gonzo]

what the heck is pre detonation, I think you meant detonation which is pre-ignition maybe

 

[custom2stroke]

sorry got my terms messed up. there's detonation and pre ignition which is 2 different things. What i meant was pre ignition problem.