im parting out an entire 05 blaster, engine is apart, the trans bearings were ready to come apart, the cylinder and piston are in usable shape but they are the ebay top end kit, have all hydro brake parts, would sell together or front and back separate
for the rear brakes, i would include carrier, axle, hubs, rotor, caliper, brake line, master cylinder, pedal and peg, not sure of the condition of the carrier bearings, and it could use new pads.
front i will include everything from spindle, calipers, rotors brake lines and master. havent checked brake pads, but lets say they are probably worn
not sure what the brakes are going for these days, so make an offer
plastics are beat, not really worth using, cracked, scratched and spray painted
everything else is good but not what anyone usually needs like a arms, swingarm, ect
for the rear brakes, i would include carrier, axle, hubs, rotor, caliper, brake line, master cylinder, pedal and peg, not sure of the condition of the carrier bearings, and it could use new pads.
front i will include everything from spindle, calipers, rotors brake lines and master. havent checked brake pads, but lets say they are probably worn
not sure what the brakes are going for these days, so make an offer
plastics are beat, not really worth using, cracked, scratched and spray painted
everything else is good but not what anyone usually needs like a arms, swingarm, ect