Blaster oil injector

[gwatt5]

My quad blew up I was wondering if I should take off the oil injector and how would I do it?

 

[Awk08]

here ya go..........
http://www.blasterforum.com/do-yourself-20/how-remove-oil-injection-without-block-off-kit-3272/

or you can buy a block off kit from vito's perfomance, ..........

http://www.vitosperformance.com/atv_parts/home.php?cat=243

 

[DirtBlaster03]

I just plugged the line going to the res with some screws. Never had a problem with it like that.

 

[jaddict]

Hope you block off the carb, or your just going to suck air and go boom.

 

[EZRider76]

My quad blew up I was wondering if I should take off the oil injector and how would I do it?

Follow the Link that AWK sent you. Cut and plug the hose to the Carb. Cut and plug or loop the hose on the injector pump on the Clutch Side. Remove the gear inside the cover or you can even snip the wires, its up to you. Very quick and easy. Just make sure that carb is plugged...and over course, don't forget to premix your fuel after you do it.

 

[*Quad*King*1986]

I have an extra block off plate if you would like to go that route? Send me a PM for details

 

[Blaaster]

I just plugged the line going to the res with some screws. Never had a problem with it like that.

Stop the flow of oil to the pump = dry pump, soon pump seize, do you see a problem?

 

[EZRider76]

Stop the flow of oil to the pump = dry pump, soon pump seize, do you see a problem?

Only if the nice little gear is still connected...but let's not say anything.

 

[Blaaster]

Only if the nice little gear is still connected...but let's not say anything.

Mums the word, Shhh!