Banshee carb on blaster?

[Tocco]

Hey guys, my friend who is moving into a apartment gave me his project banshee. It came with a extra carb, and would it work to run that on my blaster? If not why not? I have heard of people running 250r carbs on blasters. If it would how would my quad run? Its stock with boysen carbon reeds. Thanks!

 

[Awk08]

the left side carb of a banshee is the same as a blaster carb, the right side is missing a choke.
if yours has the choke, it will work.

i run a 250r carb - keihin 34mm, do not run that on a stock blaster engine, it requires matching mods .....
porting, head mod, pipe, filter, ect.

 

[Tocco]

Alright i still have the TORS System will that still work with the banshee carb?

 

[harley1-5]

I would buy a tors removal kit

 

[Awk08]

Alright i still have the TORS System will that still work with the banshee carb?

banshees have the tors syetem too (?)
but deleting it with the removal kit is recommended

 

[Blaaster]

I do think that the jetting is different, you may need to change the pilot and main jet.

 

[jus_me]

you will most certainely have to rejet.

Stock blaster, / banshee
Float height; 20~21.5 / 21~22

Main jet; 220 / 210

Main air jet; 0.7 / 1.6
Pilot jet; #32.5 / #25
Pilot air screw (turns out) 1.5 / 2

Jet needle; 5j22-2 / 5N7-3
Needle jet; P-6 (#345) /

 

[Awk08]

/\ good info !
Liked

 

[Blaaster]

/\ /\ /\
/\ /\ /\

Also liked and copied to hard drive for future reference.

 

[Tocco]

you will most certainely have to rejet.

Stock blaster, / banshee
Float height; 20~21.5 / 21~22

Main jet; 220 / 210

Main air jet; 0.7 / 1.6
Pilot jet; #32.5 / #25
Pilot air screw (turns out) 1.5 / 2

Jet needle; 5j22-2 / 5N7-3
Needle jet; P-6 (#345) /

Liked! You really saved me!