A big THANKS to Awk08 and Blaaster for the axle measurements. I measured my axle and it measures 37" end to end. I did some research and found some axles with the same sticker in the exact same position as the one on my Blaster. Would I be safe to assume that I lucked out and the axle is a DURA BLUE 2+2 since it has a DURA BLUE sticker and is 4" longer then stock?
A big THANKS to Awk08 and Blaaster for the axle measurements. I measured my axle and it measures 37" end to end. I did some research and found some axles with the same sticker in the exact same position as the one on my Blaster. Would I be safe to assume that I lucked out and the axle is a DURA BLUE 2+2 since it has a DURA BLUE sticker and is 4" longer then stock?
just finished my third warm up according to Ken Oconnor's engine break in video.
Well not as lucky as I thought. After I did my 3rd heat cycle and retorqued the head bolts and cylinder base bolts I took it out for a little ride. Dura Blue axle is BENT. Don't know what the previous owner hit but it must have been hard. So I guess I'll be looking for a rear axle.
Yeah let me know. just lookin for a stocker axle. cheapest way to go. gonna sell as soon as I can get it fixed up.