My 97 blaster has no spark unless I push the throttle slightly forward and won't sit an idle I put all new wireing except the kill switch an the throttle why don't I have spark unless I push on throttle? Any ideas?
is your tors installed?
Ititle is very confusing cuz either it sparks or not.The throttle has nothing to do with ignition
got any pics of this bahhhh boy post em
The harness fell onto the engine and literally fried it I checked everything in the carb and the reeds there all fine an I have the plug out conected to the wire and it won't spark unless I barely push on the throttle there's like a pressure switch in the throttle assembly and when the lever isn't touching it it will spark and also after putting plug it it fires and runs fine as long as I'm on the throttle enough to disengage that switch or whatever it ishow did you fry it?
compression test?
is it a oem stator?or aftermarket?
it could be a million things . are you sure the pilot jet is not clogged or broken reeds?
answer these please
How do you do that excactly I've herd of it done but never really told/ shown how to do itTORs problem. computer is thinking the throttle is wide open with out it coming off the switch.
you need to do/finish a proper TORs delete