33mm keihin vs 35mm keihin for vitos drag

[DrywallDoc]

Ported vitos 240 kit
ct exhaust
0-600 elevation
open airbox
+3 vitos stroker
32:1 premix


whats the better carb for my setup.
what can i expect from each carb.

 

[Awk08]

either will work, but I'd go with the 35 for that setup

for either, you'll NEED a #6 slide, CEL or DGH needle, 48 to 52 pilots, 155 to 162 mains. (all estimated ranges)

 

[DrywallDoc]

Will a stock copper head gasket work on a 240 kit. or do I need to get the Vito's one

 

[jus_me]

Stock head gasket is to small. If have access ro a lathe you could cut a stock one to make it fit though.

 

[best]

I haven't tried it on a Blaster yet but for the little chinese motorized bicycles I am using plumber's teflon tape twisted to a thread as a head gasket. Don't laugh! It works well at elevated compression and cylinder pressures. Head and cylinder have to be flat and you have to figure in squish needed.

Steve

 

[DrywallDoc]

either will work, but I'd go with the 35 for that setup

for either, you'll NEED a #6 slide, CEL or DGH needle, 48 to 52 pilots, 155 to 162 mains. (all estimated ranges)

Where can i find a #6 slide?

 

[MURPH]

https://jetsrus.com/carburetor/carb_keihin_PWK33-41_carb_exploded_view_parts.html

 

[Awk08]

Where can i find a #6 slide?

http://www.carbparts.com/keihin/katv.htm