Search results

ok i just got an 03 kfx 400 and the guy said the carb needed to be cleaned. anyways i put a new plug in it and tried to get it to run but nothing. its getting spark and has 120 lbs of compression. took the carb apart and seen a thin line of green slim (thinking this is anti-freeze). put the carb...

i recently traded my dirt bike and 1 of my blasters for a nice kfx 400. the guy told me he bought the quad at a swap meet for $2000 and he had lost the title when he was moving to another state. what i wanna know is there anyway to check and see if its stolen??? and if i took the vin # to the...

so i put a banshee axle on my blaster with some itp holeshot tires in the back and flipped the front tires. now sometimes when its a little snowy out ill go to turn and the whole quad freaking cause straight even if i turn, even in mud and sh*t it seems like the rear end is to big for the front?

should i jet my carb. after i bore out my cylinder .40 over???

i just rebuilt my engine top end and bottom end but when i go to ride it, it doesnt seem like the gears wine out as much as they should. 1st and second gear are like fast. even when im not taking of fast it seems the gears should wine out more any thoughts???

i found a good deal on a 250r shock from a 87 honda and i was wanting to know is it a direct swap or do i have to have some mods?

iv got a 01 blaster and rebuild it with new top end and bottom end. When i was putting a new crank in it seemed like everything was good. When i got the bike back togethor i couldnt shift into any gears at all like its stuck and when i do get it into gear it slips into neautral again and it...

ok so about 3 months ago i swapped out my old crank for a new 1. i complety assembled the engine and put it back 2gethor. i forgot 2 tighten the clutch screw so my clutch was extremly loss but i fixed that. when i go to shift it into gears it doesnt wanna shift ill push it and it sticks and then...

well i put in a brand new crank shaft and main bearings and seals it cranks fine but when i put in the case bolts that holds both cases togethor it gets harder to move. any help please

does any1 know were i can get a port and polish and head milling. i asked a shop and there asking to much any1 here that can do it

i took a micrometer 2 my cylinder 2 day and its way the top of the cylinder is like .8000 off from the bottom its really messed up. i wanna know whats the biggest bore size so i can get the groves out i seen a 1mm over size piston i wanna know if thats big enough to work...

well i have a banshee axle bouta put it on my blaster but i dont have the banshee hub. can i still use my axle without the hub or will i need it. idc about the back breaks any helpI:I

just wanna know y it wont let me post in the wanted and for sale ads. it says i may not postX(

so 2morow im gonna pull my engine off and put in my new wiseco crankshaft. it came with the main bearings and seals but i wanna know is there any other bearing and seals that i should replace while the cases are split. and any dos and dont when im pulling it apart. much helped needed

i want to bore out my blaster but i dont want to much to were it overheats alot of fries my cylinder and head. any tips on sizes

ok so i got my bearing carrier off today and wanted to paint it and my sproket and some other things but i want something that doesnt flake something good. any ideas

needing a crankshaft and rod with good bearing and no play. the one on my blaster wiggles 2 much please i have cash.

i checked my compression today and it was low only reading 80 pounds i thought i may need new rings and piston but i noticed that my rod moves a bit. were the rod connects at the bottom it wiggles back and forth i need help is it normal or am i gnna have 2 get a new rod

ok so i traded my xbox 360 for a banshee axle with itp rims and holeshot tires. he also threw in some wheel spacers that should give the rear all togethor around 8 to 9 inches. is there anything else i need to install my axle

ok so i wanna make my blaster look longer but that stupid stock swing arms is killing me. i want a +3 swingarm but i dont wanna spend $500 2 get one any ideas will help. thanks