Search results

Hi Everyone, My sons has a blaster. Fixed several times with lots of help from this forum. We coudlnt have done it without you guys. It has been working very well but he would like to try some spring riding on the ice. I was looking for some tires and rims that are studded ( or we could...

Ok. Thank you. I have a number of pullers etc so I am sure I can figure that out. Any tips on things to watch out for on re assembly?

Also , is there anything I need to watch out for on reassembly? Common mistakes, timing, etc?

Thank you very much. Sent a picture to a place next town over and he says it can be fixed. Hoping to take to hime tomorrow. Now the crank is still in that side? It didnt come out. Does this need to be pressed out?

Hi Bruce, Thank you very much. I am hoping to find a place tomorrow to weld it. We have owned this for 3 or 4 years and never had any major issues until now. No engine related problems. I dont see anything broken. Do you think this would have happened before our ownership? Could that...

Hi Everyone, Well we were able to get the case apart. Once we took the clutch side apart is slid apart easily. This is what we found. Obviously a cause of the big tansmission fluid burning problem. Can someone help us with these questions. What would cause this to break in the case? I...

Hi, Wondering if someone can chime in to help us? I have replaced the clutch side seals, clutch and everything. Its all sealed up nice. I have the stator side apart and the case are slightly split. Just with one tap of rubber mallet. But I want to confirm i can take split the cases...

Hi, So I re installed another crank seal again. And I sealed the collar and key again as well. Put it all together. Still smokes like crazy. I though maybe it was left over in the crank so i had the boy ride it for about 15 minutes. Kept smoking. After we drained the tansmission and there...

Hi Bruce, Excuse my ignorance. I am going to look at the old seal to see what you mean about the larger lip facing out. I might try taking some pictures to post to be sure. Yes I cannot feel anything on the collar in terms of gooves or damage. Just that it is shiny where it spins in the...

Ok. Great thank you. Can you confirm which side of the seal goes toward the crank bearing? I want to?? make sure I am putting the new one in correctly. Also how do I determine if the collar is good to put back in? Its a little shiny where the seal was riding but I cant feel any...

Hi Again, When I am tapping the new seal in.....how do I determine that it is at the correct depth? Is it perfectly flush with the case?

Hi, Thank yoiu very much for the reply. We have owned for about 4 years. I havent done any modifications ourselves. Replaced the brakes. Oil injection was removed when we got it. It has an FMF pipe system. It has always run well. I ordered another crank seal and trying to get a new...

I keep just adding to my post...lol. So I ordered another crank seal and working on getting a new collar as well. Just wondering if you seal the collar even if its a new one?

Just a note. The old crank seal did not look bad. No visible damge or anything. Do they go in only one way? I put it in the same way the old one was.

Hi Everyone,. I posted back here a little while ago and received some much appreciated help. To recap. My sons 2004 blaster needed a clutch. So I put in a barnett clutch pack with the specified type fluid instead of the gear saver I have always used. Clutch worked great. But it smoked like...

Hi everyone, I had another thread on doing a leakdown but I have that on hold until I do the clutch and stator crank seals. I have never done any kind of crank seal before so I just dont know what to do. I watched the videos I could find but couldnt find any on blasters specifically? I have...

I was just reviewing the video link but I dont see a clutch side crank seal replacement. Is there one out there just for the blaster or a detailed written description? After watching some of the videos ( dirtbikes mostly) the talk about some special tools ?

Hi, Sorry for the late reply. I wasnt able to get to a computer. I havnt removed the gear and collar yet form crank. Just the clutch pack at this point. I was going to work on it tonight. Is there something I need to be careful of when taking the gear off?

Hi Larry. Thanks again for all the help. I will watch the video with my son. I am was using a small hand pump little squeeze ball. Then I switched to a bike pump for a few pumps. Neither did anything . I have a 6 psi guage on it also. There is a black tube coming out of the top of the...

Just doing some more reading. Is there a good video out there that shows how to do both crank seals and applying the 3 bond?