Search results

Did you figure out what caused this?

I did oil injection delete and increased the main jet to 280. It runs pretty well now. Again I appreciate everyone's help.

With the oil delete what jet do I need to increase and how much?

I did come to the decision that I will be doing the oil injection delete. I just want to make sure that it's done right. I did find out I need to adjust my floats in the carb too

8psi for 10 min.

Yes and to see what size jets I have. I need to upgrade due to having a new intake and exhaust on it.

Thanks for the info on priming. I did the first part but not where you fill the line from the pump to carb. When I pulled the carb back off there was a little oil in the carb but I will be sure to prime everything. I really appreciate everyone's help with this.

Well I swapped out the fuel and did a leak down test. There was a lot of oil on the exhaust port. Anyways I tried to start it with new fuel. It tried once and wouldn't even try after that so I have no idea what's going on.

I appreciate the info. I will go buy some more plugs. Would a local shop have those jets or do I need to buy off the interwebs?

Where is a good place to buy those jets from?

I'll have to do a search. I have no idea what a plug chop is.

I also built a leak down tester. It holds 100+psi so it shouldn't be an issue for the 7psi that Im going to be using lol

I rebuilt my first carb today! I've never done it before but it didn't seem to be that hard actually.

I decided to build my own leak down tester.

Ive never taken apart a carb before and I have to say it wasn't as hard as I thought it would be.

New user and things I've done

I've never pulled apart a carb and it wasn't as hard as I thought it would be

I decided to build a leak down tester.

I looked at the oil system today and spun everything by hand. It seems to be working correctly and I plan on leaving it on. The previous owner had mixed fuel in there so I will drain that in the morning. The carb has a 230 and a 32.5 for jets in it. After new plug and clean carb is installed I...

What oil are you guys using to inject and what oil to mix?