Search results

i got a 03+ blaster front brakes system for sale with yfz450 front calipers and master cylinder and ss braided lines ready to bolt on brake system $250 awk style rear gsxr caliper and lever $150 toomey b1 full exhaust system 250 pwk 33m carb $130 blaster engine kor top end reworked head...

im looking to upgrade my caburetor because the stock one has the bowl treads stripped and it seems to me that now is the best time to upgrade, i do mostly mx and some trails mods as follow kor port and polish kor head mod toomey b1 full exhaust vitos +3 crank open air box uni filter 14/40...

So i just did a top end on my blaster but when i got to the air leak down test i fount out that i have a bottom end leak where the 2 halfs meet under the crankshaft What would be the beat way to fix it with out splitting the cases

i found a good plug shop video explaining everything hope you guys like it

So today I pulled out my blaster afther two weeks of been in the trailer and decided to do a compression test and this is the result 145 psi It has not lost a single lb since last year rebuild. Ive been ridding it hard for the last year mainly at the track and I feel good about it, I've been...

this is me doing some laps at the track. tell me what you guys think advice acepted

Here's me doing a couple laps on my blaster at the local track hope you guys like it. Sorry for the dad angle on the gopro this HTML class.

guys i just purshesed a lsr anti vibe stem from @Fast6hand. so i got it installed first of all my bike now rides like a dream but the turning radius has changed and what i found out is that the new stem is thicker material on where the tie rods join compared to the oem one so what i'm thinking...

I've just got this on the mail and it looks greaaaaa@greaaaaa@aaat thanks to @Bronco

i just purshesed a pair of mx boots and they are to stiff and i have trouble shifthing with them is there any way to breack them in faster the boots are the fly racing mavericks

today i instaled my new tusk nerf bars to my exiting yfz 450 heal guards, had to do some griding on the heal guards in order to make then fit but heres the finish product. now give her a good wash and get her ready for the week and at the track and lets see how it performs on it

so i did a plug shop yesturday with a 340 and it look kinda lean but i only did it on a short run so i decited to give it another shot today and here a re the results i did wot for 25 sec on it, mods are like this . full tommey b1. air lid removal uni filter stock carb kor port and polish...

i got a pro circuit silencer in good shape for $65.00 shipped to your door. let me know if intrested

So I was serching for a new pipe on the low and I found a full toomey set up on action starting at 50.00 the guys sais he did not know what pipe it was but I was stamped b1 (toomey) and listed at unknown fatty pipe so is was able to get it for 78 +shipping not bad on a complete system...

hi guys my coil went out and i would like to know what types of after markets coils you guys have used with good results

So I was doing the routine maintenance and leak test only to find our I had a bad stator side bad gasket so I pull it out and after further inspection in fund out a worn out crank bearing so I divided that one I had it apart why not do it right and go with I +3 stroke kit. So I went ot.the one...

Ok while doing routine maintenance on my blaster doing leak test I found out it have a leak on the stator side seal but when I took it out I noticed that there is some play on the shaft once I hold it and shack it side to side there some play on it, yu can nearly feel it but it's there. Should...

So I'm getti mg ready and doing a tune on my blaster and install new reeds and once I look at the card it looks stock un till I put a caliper to.it and it reeds 27.90 mm ??? Could it be a non stock carb I need to know so I can set 5he float hight

So last week a call asr to let them.know that my helm joint are shot and it's stiff. Once they answer the phone with. Atop.notch customer service they just ask me what bike I had and my info and with out any more cuestions they just told me your new joints will be on your way today and I got...

So I did a plug shop on my blaster the mods are Full pro circuit exhaust Kor ported cylinder Kor head mod Stock carb Uni filter (new) air lid off Pre mix with maxima super m 32-1 Elevation 37ft 300 main jet Stock pilot Needle stock position