Search results

Well I blew my motor a few months back and I finally got a garage to work on the blaster. I got both clips off the piston but I can not get the pin out. Anyone have any tricks to getting it out?

Im keeping the blown motor it will be getting a ct240 kit

Found a good deal on a older blaster I seized my piston and figured i could get it running again a lot quicker if I just swapped a running motor into mine. What needs to be done to the 2005 wire harness to get the older style motor to work? Yes I know search search search I cannot from my...

Its a 350 and it runs great I've done plug chops even jetted it down 340 320 both were running lean this summer so I put the 350 back in it if it had major issues I would have idle hang bogging and it wouldn't start second kick so I find it hard to believe that I have a major issue.

No the filter is in its stock location with out a lid I need to get a leak tester just have not built or bought one cause I ran great all summer I didn't think it was needed. I've put close to 15 hrs on it with no issues but I also have not really done any long rides yet due to I usually ride...

The problem is is that I have yet to pull the head off and measure bore leak test I have been running a 350 jet 24 to one koltz tech. Mods I know of find fatty pipe turbine core trail legal pipe vforce 4reeds knn filter no air box. I was told has hot rod crank wiseco piston. It runs like a top...

Not sure if I need to go up one jet or two its been pretty dang cold in mn and having some issues getting to run with out the choke pulled out to the first notch. When its pulled it runs great no bogging or idle hang just not sure if I should go up one or two jets.

Who in there right mind would strap cardboard to block wind and snow it wouldnt last at all. And I have never heard of this. I think that statement about blocking is wrong these are air cooled motors and if it needs to I sure as hell wouldn't use a box. Sheet metal tin anything but cardboard.

I'm already one jet up from normal cause I've been riding plug choped and was a little ritch but I'm ok with that. Just not surewhats the best oil I know some seporate from the gas in cold weather. I will be dragging my icefishing gear out as well as riding when the bite is slow to pass time.

I plan on doing quite a bit of riding out on the lakes and I will be running the blaster in cold temps. The question I have is what premix oil is the best for mn cold weather. I'm currently running kolts techniplate at 25:1

Looking at all my options for winter riding been leaning to just studs but was wondering if anyone's done a ski kit on there blaster. ATV Tires to Skis Conversion Kits - 4x144mm 4x156mm 4x85mm Bolt Pattern ATSki Kits - ATV to Precision Snowmobile Skis Kit

I have trouble finding neutral after riding for a while and or if its warm. Is this an adjustment or clutch issue? Havent pulled it apart yet to investigate but when I bought it it did come with some after market springs which I still have. I figure I'm stupid if I don't do the clutch at the...

I am thinking about buying a new set of tires and wheels and im looking to see what others are running on there blaster. Info im looking for brand wheel size tire size Pictures would help allot also as well as where you can buy them.

One just sold for 3500 $ on there over the weekend I'm happy with it but I'd like more hp

I know what its worth to people on here but sometimes its easy as sitting back waiting for some young buck to talk his parents in to spending 500 $ more fore one with all the mods a rooky would want.

I can get it bored for damn near free but not ported and polished. I'm asking 2300 cause I got it for a sum + added vforce 4 spent good time jetting it correctly new fmf turbine core bars bar risers grips and still ordering parts as normal maintenance. I've owned it for a month all the few hrs I...

Plastics are not perfect but nice planning on plasti diping it at some point and do a custom seat cover. The original owner let it sit for a while when it blew up due to injection going bad. I may just keep it the way it is for a friend quad and get a banshee as well in time. Still not sure...

Naked barbie lol. I'm in minneapolis yes its on craigslist for only one reason I want a banshee now blaster doesn't cut it for my hp addiction. Bought it cause all the parts on it are worth more than the quad brand new.

Was up at bir race track this weekend ran into this guy and he was cool enough to libe up and race me on the blaster. I got smoked lol it runs alcohol and is fast as f*ck 400 stroker.

Ok so i got it all back together i went with a 320 jet first to be safe and my idle speed has gone down quite a bit. Took it down the street once it was warm. Original owner premixed with yamalube and i swaped over to koltz r50. It pulls good through first and seconed bogged a little going into...