Search results

  1. A

    my knive collection

    Spyderco pacific salt, and a well used CRKT folding razel.
  2. A

    my knive collection

    Spyderco pacific salt, and a well used CRKT folding razel.
  3. A

    Is Yamaha blaster a good trail ATV?

    Depends on what kind of trails IMO. One I got done with my smalls mods and work, I took it to a 19mi trail close by in the national forest. Lots of 'humps' (ALOT) but otherwise very smooth. It was great there, I was jumping most of the humps, and I have never ridden a sport quad. It was awesome...
  4. A

    I like em dirty

    This is the side of that road
  5. A

    I like em dirty

  6. A

    Blaster wont start

    It was the harness somewhere. I found a thread on here with a minimal harness which helped me check, now it starts up first kick. However, right front wheel has way too much camber, but im thinking its just bent (rolled the bike down a hill right before I went to do my mods). I guess I just need...
  7. A

    Blaster wont start

    I took off spark plug, and hit kick starter and im not seeing any spark. All wires appear to be connected, tors arent touching each other, ignition (was removed) are taped off and not touching each other, same with oil inject lines.
  8. A

    Blaster wont start

    Finished my small build, and now blaster wont start. It started right up before I tore it apart. Could the spark plug have went bad sitting for 2 weeks? Fuel is turned on. Im not sure what else it could be. I did remove the tors, but I unplugged it from the carb and the little box up front...
  9. A

    merked from the pigs today!!

    Damn cops coming when you ride on property without permission!
  10. A

    My first atv/vehicle project.. EVER

    Only got a bit in late at night here, but some progress made! Got oil drain plug out. It took a solid 2 combined hours, but i finally got it out. Left front brakes done, flipped front tire. Unfortunately I tried the right side first and didnt know about adjusting the screw all the way out...
  11. A

    My first atv/vehicle project.. EVER

    Well, got my back brakes done this morning. Wheels on. Looks great with the spacers. Got my fronts off, but I dont have a big enough socket to take the hub off to get to the brakes. Got the carb off and cleaned it. Will put in new jet later. Still have rounded drain plug and rounded oil pump...
  12. A

    My first atv/vehicle project.. EVER

    It is rounded... Ill have to pick up a pair of vice grips tommorow, I didnt even think of that. Thanks for suggestion
  13. A

    My first atv/vehicle project.. EVER

    Well, I picked up a 2002 blaster in pretty good condition. I have no vehicle type knowledge, but I decided this will be what I learn on. Im pretty good with working on guns, and I figured im already 24.. I need to learn. Today I started, as I thought all my parts had arrived. Started...
  14. A

    Jetting - I've read, but im dumb.

    Well i've ordered jets, EBC brakes all around, shorty rear brake cable, FMF pipe, rear wheel spacers! Heres to hoping it turns out nice!
  15. A

    Jetting - I've read, but im dumb.

    from what I gathered in the 'what jetting' thread, I should get around 290 main, and stock pilot? Do I need to move need position?0.2.
  16. A

    Jetting - I've read, but im dumb.

    Just got a stock 02 blaster, besides a dg silencer. Tommorow I am grabbing used fmf pipe, getting oil inject block off (plan @ 32:1), and taking off the air box lid. These will be my only performance mods for sometime. My question is 1. what carb jets and settings do I need (approx...
  17. A

    99' Blaster

    A dealer about 3 hrs away has a box stock 05 with 10hrs on a rebuild for 1500. Would the older built one be a better deal?
  18. A

    99' Blaster

    1999 yamaha blaster w/ completely rebuilt motor Worth it? Lowest he will go is 1200. Never had a blaster, only have utility quads. This will be my first sport, trying to keep it under 1200. Thanks!
Top Bottom
Back