Search results

Hey guys update on my quad is no good still got nothing put a 280 main jet in checked reeds. The tors is unplugged and not on quad cause I got a aftermarket carb. I read somewhere about splicing wires together on the 2003-2006 yamaha blasters mines a 2004 so what wires and how do i bypass the...

I'm confused on what wires to splice together I got a 04 blaster brand new top end and brand new jug stock bore new boyseen power reeds a brand new aftermarket carb and a dmc alien full exhaust have stock pilot jet,280 main jet, stock needle position and 1.5 turns out on the air screw starts...

I'm confused on what wires to splice together I got a 04 blaster brand new top end and brand new jug stock bore new boyseen power reeds a brand new aftermarket carb and a dmc alien full exhaust have stock pilot jet,280 main jet, stock needle position and 1.5 turns out on the air screw starts...

Ok thanks for the help guys I'll be messing with it tomorrow and trying those things. And would being to lean cause it to just bog out and stall. If I let off the the throttle when it bogs down it I'll stay running just finished building the quad everything motor wise is brand new except the...

What size jets and needle postion has brand new cylinder on stock bore with a stock size piston kit also has dmc alien exhaust and boyseen power reeds nothing crazy but with those minor mods what do yous recommend as far as jet sizes and the needle clip postion and how far out on the air screw

Changed the plug today no change. I forgot to mention that my blaster has dmc alien full exhaust and boyseen power reeds and the carb was bought off ebay it's a brand new mikuni which i assum has the stock jets and and stock needle postion and stock air/fuel screw setting

Reeds are good just replaced them and the carb is brand new on stock jets and air screw setting I heard that the crank seals could cause this

Hey there this is my first post so bare with me lol. I got a 04 Yamaha blaster has tors delete and oil block off kit has a fresh top end and brand new cylinder,piston kit,also has a brand new carb and reeds. It starts and idles great and drives great if you feather the throttle but as soon as...

Have any blaster motors running or not with a good bottom end or just a usable bottom end

hey guys i just bought a 2000 blaster and i want to put new rings in it do i have to hone the cylinder to put new rings in it

thanks guys i did a plug chop and the plug was a gray color i did it with a brand new plug

hey guys i have a 1997 blaster bored 20 over fmf gold series head pipe and a powercore II silencer boyseen reeds and a stock aftermarket air filter. what jetting should i use right now its the stock jetting 230 main, 32.5 pilot, and 1.5 turns out on the air screw i checked the plug and it black...

thanks guys she runs like new now i really appreciate all the help

and whats the fuel line sizes on them they dont look the greastes

thanks for the help runs great whats the compreesion for a blaster just in case it does need a rebuild.

i have a 97 blaster with fmf exhaust. it hasnt been rebuilt since new and it sat for 6 years. it runs and drives but while sitting at idle then you hit the throttle it bogs out and dies not sure what it could be any help thanks.