Recent content by Throwntoast

Do you know what slide and needle and needle jet is stock?

i just ended up buying a new carb what i was told is the mikuni vm26-606 carb is the stock carb all you have to do is pput a new pilot and find the main jet you need.my old carb didn't even have numbers on the jets so i didn't want to chance it considering i just rebuilt my blaster

hey i was wondering where should i start when i start plug choping with testing the main jest i got the ones you told me to get or shuld i start from270 and go up or go 310 and work my way down would it be safer to work my way down considering the top end just got rebuilt

What I am asking is if I get the right jets is the body of the carburetor good and the jet needle

I know but the slide needle is different the needle jet is different on the other one

I know there are two types of vm26 mikuni carbs there is a 606 and 8074 carb number witch one is preferred they have different stock jets and needles http://www.mikunipower.com/VM01.htm

Is the mikuni vm26 606 a good replacement for a stock blaster carb when I got my blaster it came with a Chinese nock off?

Is the mikuni vm 26 what comes stock on a Blaster

Could you tell me what is the name of the mikuni carb that comes stock for a 1999 blaster I have tried looking around but I keep coming up with different ones and thanks for all your help.

I have some pictures of my jets and my carb is it stock I am not sure?

these are what my main and pilot jets look like what kind of cab is it I know it's a mikuni but it has no id number on it

I have a stock bore with vito's billet bullseyes reed cage with the vito's dual stage reeds a stock carb with I guess stock jets there is no number on the jets I also have a full FMF Fatty pipe with a turbine core 2 silencer a uni multi stage foam air filter with the lid off the air box and I...

hey i was wondering if i should braze a plate over the hole that the chain derailing made or scrap it the motor suns just leaks alot and does not idle it's right where the clutch lever is on the motor