Recent content by jdp1093

I ordered these and have to return them. The knurl is too small. I am goint to measure the knurl on the oem stud and write these people to see if they have some to match. Thanks.

I have and no one can match them. I finally went and bought bolts and put them on. I will keep looking for the studs. Thanks for the reply.

Where can I find wheel studs for my 1996 blaster that are 38-39 mm long instead of 29 mm? I put spacers on the rear and there is not enough threads on the oem studs. I am trying not to use bolts. Thanks!

I know this is probably an age old issue but can someone point me in the correct direction to a thread on here that may help. I put a 400 ex rear shock on my 96 blaster. 300% better but part of the shock is pushing the front of my air box and the tube up . What has been done in the past to fix...

Thanks for the info! I just bought a the 400ex shock. I'm looking forward to getting it on and see the difference . I also ordered the kit from oconnor. Any suggestions for bolt on front shocks without any mods? I was thinking raptor 660's I believe. Thanks!

I have a 1996 blaster that I am planning to extend +4 and put a 400ex rear shock on. The 400ex I found is from a 2012. Will this make a difference in the mods that will need to be done? I always see everyone talk about these shocks and the slight mods that need to occur but I have not heard...

I had 21x10x8 rear tires on my blaster. I did some looking and found that 22x11x8 tires would work fine. So I ordered a pair and put them on today. The left is a little tight but fine, the right is touching plastic. Since they are mounted I cannot return them. Should I sell them and find the...