Recent content by Jblaster19

hi I have a 98 Yamaha blaster bought it like 6 months ago never had any issues...all of a sudden it started bogging out before it hit powerband and was stalling I might of had an air leak I’m not sure...I managed to crack the gear on the back of the clutch basket so I changed out the basket and...

I rode the bike a few times since I bought it and never rele had an issue then all of a sudden I started it up one day rode it around the block and wasn’t ridding the same...once I’d hit half throttle the bike would bog and couldn’t get it passed that...if you slowed down to a stop the bike...

I’m interested in buyin the tester not sure how to message u tho..I haven’t touched the carb since purchase so the 250 was in there but I thought it was runnin fine then this happens but I’m pretty sure there’s a leak somewhere becuz the rpm would run on me sometimes puttin the bike in...

It has oil block off and toes delete mixing at 32:1...when I took the carb apart it everything looked fine and it’s 250 mainjet which is close to the 260 that’s rated for the exhaust..def too much air but now if I buy new rebuild kit and new carb as I going to be ok

I started the bike after a week or so and took it for an easy blast around the block and it rode fine then all of a sudden it starts boggin out and when I hit the throttle it cuts out at half throttle and doesn’t even hit the power band...I cleaned and checked the carb but was doing the same...

can’t see oil level thru glass i drained trans oil and filled it up again with 650 ml and still can’t see any level not sure if it’s dirty or just not enough oil