Now we need some color that we can see. Almost anything will do. I used a few drops of "color" from my ink jet refill kit. Other things that will work are food coloring,gatorade,thinned coffee creamer ,milk,brandy,etc.
I obviously ran into an issue trying to "CC" the chamber from this end using colored water. Its really "skinny" where the squish band is and water has a "skin" on it (thats why water bugs don't sink),so its hard to get the water to flow into thin areas. I could have used colored alchohol and it would have worked fine. I could have also added borax to the water to soften it,but for times sake I just taped up the hole,flipped over the head and filled it from the other end until it reached the bottom spark plug threads.
Now we need some color that we can see. Almost anything will do. I used a few drops of "color" from my ink jet refill kit. Other things that will work are food coloring,gatorade,thinned coffee creamer ,milk,brandy,etc.
Seal it with a little bit of vasoline,or grease.
It goes on here...
looks like this.
Save a buck! A flat cd case works great! drill a hole in it.
Time to "CC" the chamber.
joeak47

Now we need some color that we can see. Almost anything will do. I used a few drops of "color" from my ink jet refill kit. Other things that will work are food coloring,gatorade,thinned coffee creamer ,milk,brandy,etc.

There are no comments to display.

Media information

Album
Cutting a "Squish band hemi head"
Added by
joeak47
Date added
View count
901
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
7340-1340861933-b9da3efd22c40465f8d415cb213126f5.jpg
File size
46.6 KB
Dimensions
600px x 450px

Share this media

Top Bottom
Back