Can a wrist pin be reused if im putting my top end with 25 hours onto another bottom end? .im replacing the c clips and wrist bearing of course.
Thanks in advance
Have a good look at the pin. If it is all shiny metal, no problem.
If it is burnt, blued, rough, pitted, ridged, or marked, or if you can feel the marks with your fingers, no good.
Kind of a fuzzy photo, but only one of these pins are any good:
Can a wrist pin be reused if im putting my top end with 25 hours onto another bottom end? .im replacing the c clips and wrist bearing of course.
Thanks in advance
Like I told another forum user, go ahead and use the old wrist pin, it's like using old worn out stretched chain and new sprockets. Disaster is eminent