would these be easy to fab up

[2smokin]

http://www.ebay.com/itm/ATV-Rear-Br...Parts_Accessories&hash=item25866d6b33&vxp=mtr

http://www.ebay.com/itm/Rear-Brake-...Parts_Accessories&hash=item1c3cbe8e06&vxp=mtr

http://www.ebay.com/itm/CHINESE-GO-...Parts_Accessories&hash=item25766c0ceb&vxp=mtr

http://www.ebay.com/itm/Hydraulic-B...Parts_Accessories&hash=item3f2c9e8903&vxp=mtr

would these cheap hydraulic brakes be easy to fab up on a 94 yamaha blaster that already has a 03+ brakes on it

 

[2smokin]

they are so bad their junk so there on there but not funcioning at all

 

[Awk08]

if it already has an 03+ brake, why would you want some chi-wanese imposter caliper ?
prolly never find parts for it if needed.

edit: look for a used banshee caliper, it'll bolt right on


just say no to chi-wanese

 

[2smokin]

well i figure the pads are plentiful and cheap if you get {i dont know how to say this} a good knock off caliper so their so inexpensive calipers themselves and im on a budget like everyone else and yes i know its better to get something well made but who cares their 29 dollars and free shipping and from the pics and bolt locations a drill bit and a tap i believe the one will just bolt up also my 03+ brakes is shot pads were gone and piston shattered .. was like that when i got it i was gonna buy pads but when i removed them i seen the damage

 

[2smokin]

and its nice to see the infamous awk chime in thank you

 

[2smokin]

http://www.ebay.com/itm/CHINESE-GO-...Parts_Accessories&hash=item25766c0ceb&vxp=mtr

http://www.ebay.com/itm/2sets-x-Gy6...her_Vehicle_Parts&hash=item3a850dd5db&vxp=mtr

how cheap is that i have the hoses and reservoir and master cylinder in place
compare
http://www.ebay.com/itm/2001-yamaha...Parts_Accessories&hash=item20df681480&vxp=mtr