I just rebuilt it, fresh rebuild as of 1 hour ago, tons of compression, 73mm bore, fresh plug, fresh gas running 92 octane 32:1 klotz, everything is fine with carb... Any ideas anyone? Please and thanks.
I just rebuilt it, fresh rebuild as of 1 hour ago, tons of compression, 73mm bore, fresh plug, fresh gas running 92 octane 32:1 klotz, everything is fine with carb... Any ideas anyone? Please and thanks.
Do you have spark? And did you make sure that it is getting gas. Is it trying to start? You could have been a little more detailed.
stick a plug in boot and kick it over! easy peesy. You can rebuild it but not check for spark. Common YOU CAN DO IT!.
You can get spark, it just wont fire cause it could be the timing, check for a sheared key. What was the reason you rebuilt the motor.?
Blown top end. Lol Doing burnouts in the backyard turns out to be a bad idea.
I see in your signature that your using Castor 927. Its not a good thing to do on our Non-Power-valved air cooled blaster, they can get clogged up really easy. I would suggest switching over to Maxima Super M (that is if you like Maxima)
Is your gas turned on and are you full of gas?I actually switched to klotz super. I just haven't changed it yet
Is your gas turned on and are you full of gas?
Don't you have a kill switch?
I had this problem, My cable got melted and kept sticking like crazy, i just bought a new cable and i bought the cable lube oil and the tool. It works like a top!