I bought a Vito's stuffer crank from a member and its supposed to be a 3mil stroker crank and the funny thing is I had my 240 cylinderhead cut for this and I did a compression test on it and its only at 132psi? sooo I then put a standard stock cylinder and head on it and the piston did not make contact with the head,then I did a compression test it came out too 160psi plus,any ideas? is there anyway I can meager with my micromiter to see,today I did meager from the top of the cylinder to the top edge of the piston and that came too 59.40mm let me know what you guys think.Thanks
Last edited by a moderator: