i have a vitos exhaust on my blaster and i wanted to know how well it performs over stock and if i should jet my carb. thanks
vitos exhaust on 05 blaster
- Thread starter sk8ball447
- Start date
vitos should suggest a jet for a stock blaster. You always check your jetting for any performance upgrade
here is how to figure out the proper jetting
http://www.blasterforum.com/engine-13/plug-chop-how-vid-48226/#post607385
http://www.blasterforum.com/engine-13/plug-chop-how-vid-48226/#post607385
Don't really know how it will perform on a stock motor seeing its a big bore pipe. I know it sounds real nice from the YouTube vids I've seen.
Might be a bit much on bone stock motor, but it's a good reason to get it ported 
As far as performance I love mine, worked good when the motor was stock, great with CRR porting I:I Would put it up any right bend any day8-|
As far as performance I love mine, worked good when the motor was stock, great with CRR porting I:I Would put it up any right bend any day8-|
As to jetting, yes. Anytime you change air flow in or out you have to jet. As to yours, I would start at 280-290 and plug chop or good plug read.
