sk8ball447 New Member Jul 14, 2011 32 0 0 May 28, 2012 #1 i have a vitos exhaust on my blaster and i wanted to know how well it performs over stock and if i should jet my carb. thanks
i have a vitos exhaust on my blaster and i wanted to know how well it performs over stock and if i should jet my carb. thanks
S scotj77 Member Feb 11, 2010 5,546 70 85 46 Orlando, fl May 28, 2012 #2 vitos should suggest a jet for a stock blaster. You always check your jetting for any performance upgrade
vitos should suggest a jet for a stock blaster. You always check your jetting for any performance upgrade
S scotj77 Member Feb 11, 2010 5,546 70 85 46 Orlando, fl May 28, 2012 #3 here is how to figure out the proper jetting http://www.blasterforum.com/engine-13/plug-chop-how-vid-48226/#post607385
here is how to figure out the proper jetting http://www.blasterforum.com/engine-13/plug-chop-how-vid-48226/#post607385
B blasterdemon7 I'm not winning. Nov 19, 2009 13,642 251 125 53 Delaware May 28, 2012 #4 Fat Bastard ? .
B blasty 95 Member May 15, 2011 1,870 8 80 26 elkton,va May 28, 2012 #5 If its the fat basterd its suppose to be a preety good pipe..
B blasterdemon7 I'm not winning. Nov 19, 2009 13,642 251 125 53 Delaware May 28, 2012 #7 Don't really know how it will perform on a stock motor seeing its a big bore pipe. I know it sounds real nice from the YouTube vids I've seen.
Don't really know how it will perform on a stock motor seeing its a big bore pipe. I know it sounds real nice from the YouTube vids I've seen.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI May 29, 2012 #8 Might be a bit much on bone stock motor, but it's a good reason to get it ported As far as performance I love mine, worked good when the motor was stock, great with CRR porting I:I Would put it up any right bend any day8-|
Might be a bit much on bone stock motor, but it's a good reason to get it ported As far as performance I love mine, worked good when the motor was stock, great with CRR porting I:I Would put it up any right bend any day8-|
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI May 29, 2012 #9 As to jetting, yes. Anytime you change air flow in or out you have to jet. As to yours, I would start at 280-290 and plug chop or good plug read.
As to jetting, yes. Anytime you change air flow in or out you have to jet. As to yours, I would start at 280-290 and plug chop or good plug read.