top end power?

[ringoflowers]

i would like to know how to get some top end power.

 

[Zwiser]

14 tooth front sprocket

 

[Blaaster]

Bit hard to offer any info unless knowing what mod you already have.

 

[ringoflowers]

i just got bored .060 and opened the exaust port by 1mm, i put a 34mm carb with a 290 jet right now and got the reeds to go with it. i put a fmf sst fatty with the powers core 2 exaust on it. and thats it for now. its got great take off power and wraps up really quick. but i would like just a little more on the straight shots. im still running with both front and back stock sprockets.

 

[blasterdemon7]

F7 pipe .

 

[hudack]

14 tooth front sproket and if you still want more after that you could pop a 38 on the rear

 

[Blaaster]

You asked about getting more power at the top end. The F7 pipe will give you the top end power. By changing to a bigger sprocket on the front and/or a smaller on the back will give you more speed, but less power and vice versa the sprocketsfor more power.

So the question is more power or more speed?

 

[1995blaster]

IF you have money you could send it off to get some porting and head mod.

 

[ringoflowers]

I'm just wanting more speed the power is great it just feels like it could have more in 6th gear. It wraps out really fast.

 

[cole454]

I'm just wanting more speed the power is great it just feels like it could have more in 6th gear. It wraps out really fast.

Then what you need is a gearing change. Bigger in the front and smaller in the rear for more speed.

 

[Larry's Shee]

Or bigger tires

 

[Racer51]

X2 on larry's shee 20 inchers from maxxis razors will work good. instead of taking a front sprocket off.

 

[Blaaster]

I know which is the cheapest fix 1 or 2 more teeth on the front sprocket.

 

[Blaaster]

There I go again putting my mouth into gear before thinking of the consequences. It is not a good idea to mix and match chains and sprockets. Strict rule, new sprockets, new chain! Still a cheaper option than rubber.