Well if anyone remembers a while back I dug out my old kx80 that had a blown xr75 in it and had been sitting in my yard for years. Well I stripped it all down and cleaned it up, I've also been looking for a kx80/100 engine to no avail, so its getting blaster power! I'll be using my current blaster engine as a "guide" so I can make the custom sub frame and mounts, then when I'm done I'll pick up a blown up blaster for around $300 to use in it and put my good 03' engine back in my blaster.
Ok now I defiantly have fitment issues but its not as bad as I thought it was going to be. I have a friend that welds for a living so I have access to professional equipment ( and his help ) , so what I plan on doing is making a custom sub-frame to house the beast. And also the clutch cover practically sits on the brake pad so I'll need to heat it up and bend it out and in.
This will be fun
Ok now I defiantly have fitment issues but its not as bad as I thought it was going to be. I have a friend that welds for a living so I have access to professional equipment ( and his help ) , so what I plan on doing is making a custom sub-frame to house the beast. And also the clutch cover practically sits on the brake pad so I'll need to heat it up and bend it out and in.
This will be fun