starting problem

[Josh Slusher]

This?

 

[Blaaster]

9 and 10

 

[Herpderplol]

thats the cap, slide and a needle.

What we are talking about is the float needle and seat. you need to take the bottom of the carb off to find that

 

[Josh Slusher]

This?

 

[Josh Slusher]

If this is it. It is very clean but there's seems to be some slight cracks on the bottom of the black things

 

[Blaaster]

Those black things are the floats, do they have fuel inside them?

The needle and seat is in the second pic!

There could be a varnish build up inside, which can be removed by revolving a Q tip dipped in toothpaste in it.

The rubber tip of the needle could be damaged as well, or the the O ring around the seat could be split.

 

[Josh Slusher]

Those black things are the floats, do they have fuel inside them?

The needle and seat is in the second pic!

They don't appear to

 

[Josh Slusher]

The needle was clean as well maybe it was just flooded or needs an adjustment sighs I think my bike hates me.

 

[MURPH]

http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/

 

[speedyslyder]

Here's my carb

that is what i call a neglected carb..
parts missing....a cable tie holding boot on really

 

[Josh Slusher]

that is what i call a neglected carb..
parts missing....a cable tie holding boot on really

Yeah this is my first bike of my own and I had no idea what to look for I replaced the zip tie with hose clamps and bought a carb tube kit and put it on.