Ok so I bought a 04 blasty that needed a top end, due to oil pump failing. So had the cylinder bored and honed, and now it wont start at all.
1) It has great compression checked it twice
2) Has spark
3) gas will come out of the drain of the carb
So now it wont start pulled the plug and its like its not getting gas from the carb to the cylinder. If anybody can give a direct way to bypass the TORS system that correct that would be great because I have found 4 differnet ways to do it and it seems none of them are right. Also if there is no key plugged in would that cause the problem. Im at the last straw on this thing so if I cant get it started it's going on craigslist.
1) It has great compression checked it twice
2) Has spark
3) gas will come out of the drain of the carb
So now it wont start pulled the plug and its like its not getting gas from the carb to the cylinder. If anybody can give a direct way to bypass the TORS system that correct that would be great because I have found 4 differnet ways to do it and it seems none of them are right. Also if there is no key plugged in would that cause the problem. Im at the last straw on this thing so if I cant get it started it's going on craigslist.