I posted a previous thread on these stators and I know to stay away from them but I'm starting to wonder in anyone has gotten one of these to work on a pre-03 Blaster? I keep reading posts where people install them the machines won't rev. I'm wondering if it could be related to something like the stator sensing that the parking brake is on. The stator is set up for 5 wire so it mimics the 03-06 setup. The 5th wire is just a separate ground, but I can't help but think that there's more to the issue than just having made a POS stator. The issue I'm having has all the symptoms of a sensor killing the spark. It just bogs under any throttle but idles fine. Again, the stock stator works fine so not a jetting issue.
I have several wiring harnesses & electricals, both pre and post 03 so I could do some testing if anyone has a few ideas (other than just to smash the stator with a hammer!).
Blaster Stator on eBay
http://www.ebay.com/itm/STATOR-Fits...Parts_Accessories&hash=item4165fdf42f&vxp=mtr
I have several wiring harnesses & electricals, both pre and post 03 so I could do some testing if anyone has a few ideas (other than just to smash the stator with a hammer!).
Blaster Stator on eBay
http://www.ebay.com/itm/STATOR-Fits...Parts_Accessories&hash=item4165fdf42f&vxp=mtr
Last edited by a moderator: