Ok put in new top end on this yamaha blaster from hell that I got from craigslist. This thing was hacked to sh*t when I got it. Everyrhing that could possibly be wrong with this thing has been wrong. Finally got spark after replacing stator. Had cylinder bored and honed installed piston and rings. Rebuilt carb. The first start on this thing and it fires right up but blowing tons of white smoke. Started reving really high and i turned down idle screw. Feels like it bogs when touching throttle. Tons of white smoke! I know this thing has sat a really long time. I draoned the tranny fluid and put in some bel ray gear saver oil. Filled it up to 3/4 up the oil fill line on tranny. Is this white smoke tranny fluid? I shut it off after a minute didnt want to screw up engine. I used premix at 24 to 1. Engine not broken in yet and sat for years. Please help tjis thing has costed a lot of time and money!