So i want to do a rebuild im wanting to put a stroker crank in it but they say i need too machine the head i was just wonding if i could put a thicker head gasket in it?
rebuild
- Thread starter mac_44_2010
- Start date
yes you can get a gasket made by cometic but if you get the +3 crank from vitos it comes with a spacer plate.
if your going with the stroker you might as well go ahead and get the porting and head moded to work with a single gasket. it will run much better and easier to work with 1 gasket than 2 and a spacer. less room for leaks as well!
if your going with the stroker you might as well go ahead and get the porting and head moded to work with a single gasket. it will run much better and easier to work with 1 gasket than 2 and a spacer. less room for leaks as well!
