First off, let me thank all the members that helped me with suggestions and help throughout this build. I appreciate it greatly and this blaster could not have been built without the help of this forum and its members … (too many to list….lol)
All work from the bare frame to finish can be seen here:
http://www.blasterforum.com/full-re...dy-dream-build-need-engine-suggestions-34143/
Chassis | Suspension | Controls:
A Arms: ASR +3,+1, Long Travels (16¼ in shock mount) PC Black
Swingarm: Swingarm Shop HD, +3, PC Black
Steering Stem: Stock PC’ed Black
Stabilizer: Coming
Axle: G-Force
Carrier: SRP Dual Row Billet Carrier
Locknut: G-Force
Hubs F|R: Stock PC’ed RED
Bars: Tag T2 Banshee High Bend Fat Bars w/ Pro Taper Mounts, (raises steering two inches overall)
Throttle/Clutch Lever: ASV Black levers All Around
Grips: Pro Taper – triple density grips
Nerfs: Xtreme Fab Series 1 Nerfs w/ Built in Peg, GYTR Balance Edition Raptor 250 Heels With Custom Made Red PC’ed Mounts
Bumper: Moose Racing GNCC Front Bumper
Grab Bar: UM Racing Wide Series Rear Grab
Front Shocks: HLS/GTThunder Custom Made YFZ Dual Rate 16¼ in Front Shocks, Black and Red Eibach Springs (165lb, Trail Setup)
Rear Shock: HLS/GTThunder Retuned YFZ Stock Rear Shaft, Dual Springed (165lb, Trail Setup), Custom Bushings (made myself), Turned Down Bolt and Polishing Courtesy of 1bad442
Brake Lines: ASR Stainless Three Piece Fronts (+2 stem, +3 arms), ASR Stainless Rear (+3)
Rims F|R: Douglas .190
Tires F|R: Kenda Bearclaws or Kenda Klaws (dependant on riding)
Body:
Frame: 03 YFS200R Stock Frame with All mounts not needed shaved and re-welded with Custom Cut/TPR Tarantula Racing 11 piece Gusset Kit, PC’ed Black
Plastic: Maier Custom Fronts (Dark Silver), Red Maier Tank and Hood (03-06), Maier Custom Rear (Dark Silver Shaved and Cut w/ Custom - Self-Made - .190 Aluminium Fender Guards)
Guards/Mounts: AC Racing Swing-Arm Skid (Brushed), UM Full Body Skid (Custom Mounts, Brushed, *Still Being Installed)
Graphics|Seat Cover: Moose Seat Cover (*Still Being Installed) so 03-06 Stock cover in pics. Some Random One Ind., Wiseco, UNI, Toy Machine Decals on Plastics. Custom Cut Blaster Decal on Tank
Number Backgrounds: NA
Handguards: NA
Bar Pad: Do Not Use
Fuel Tank: Stock, Tusk Red Anodized Breather Cap
Engine|Drive System:
Cylinder|Head: Stock Bore (66mm) Cross-Hatched for New Piston, Casting Flaws cleaned out of intake, Polished Exhaust Port, Cylinder (Blasted Bare)
Piston: Wiseco Super-Lite Piston/Ring/Pin
Carburetor: Mikuni TM Flatslide 28mm (250 Main, 32.5 pilot)
Air Filter|Box: CFM Air-Box, UNI 2½ in Filter, AN fittings Red Reducer
Pipe|Silencer: DMC Alien Full Exhaust, DMC Anodized Silencer
Clutch|Plates: ERT Dirt Digger Clutch Kit, Modified Stock Basket
Gearing F|R: 13/42 Primary Drive (Black)
Chain: D.I.D. ERT2 Non O-Ring Chain (Gold)
CDI: Stock CDI 03-06 Tors Removed
Gaskets: Cometic EST Gasket kit
Other: Pro-Design V-Force Billet Intake and V-Force 3 Reed System, (Both were hand ported incl. inside V-Force reed cage to perfectly match Intake), Polished Porting Inside Billet Intake, Custom Oil Block Off
Other Mods Not Listed: Trenga Racing Billet Oil Pump Cover, ALBA Cable Holders for Front Brake Lines and Throttle Cable on Frame, New Chain Rollers/Slider (not sure brand), All New Bearings and Seals Throughout, Raptor 660 Rear Caliper, ASR Red Anodized PB Block-Off, Moose Racing Banshee Brushed Aluminium Throttle Cover, Brand New Stainless Over 95% of Quad
I Built This Whole Blaster (minus some welding and PC)
Some of the Custom Work I'm Most Proud of: .190 Aluminum Fender Guards/Mounts, Skid Plate Mounts on Body, Raptor Heel Guard Brackets, Majority of Gussets (including custom gussets to fit around nerfs), intake/reed porting, Cylinder Cleaning and Clutch Basket Modification (courtesy of KOR videos on BF.Com).
No Paint Was Used in Building This Blaster (All Parts Were Powder-Coated):
PC’ed Red: Front and Rear Wheel Hubs, Brake Hub, Sprocket, Rear Brake Mount, Tail-Light Mount, Heel/Fender Guard Custom Mounts (4 Total), Nerf Pegs, Front Fender Support, Tie-Rods.
PC’ed Black: Swing-Arm, A-Arms, Frame, Rear Brake Pedal, Rear Fender Mount (though not used), Front Disc Guards, Spindles, Steering Stem.
I think I remembered to list everything …
And looking forward to some good competition this month
Rear View
Side Profile From Rear
Side Profile From Front
Side View