I will get some up tomorrow, I was working on it today but ran into axle problems. I got it started today though, was super happy to hear it run after all the work.
I still got some work left to do.
(No Good Deed Goes Unpunished) Rebuild
- Thread starter Mcaroonie
- Start date
I will get some up tomorrow, I was working on it today but ran into axle problems. I got it started today though, was super happy to hear it run after all the work.
I still got some work left to do.
Here are the latest pictures of progress.
I am in the midst of deciding between 01 and 03 nose piece and also which headlight to run. I know the 03 will take a little fabrication.. More chances to play around with a welder?
I am in the midst of deciding between 01 and 03 nose piece and also which headlight to run. I know the 03 will take a little fabrication.. More chances to play around with a welder?
I think you should run old style lol cause I want that red hood, btw new style takes no fab, the hood bolts right on, then you just bent that little bracket up to hold headlight
Im curious about how you got the plastics cleaned up with wire wool and the other thing you mentioned? .. if their a thread on the topic?
I used a degrease agent found at Walmart to scrub them down first. It is
called Purple Power. Then I followed this thread
http://www.blasterforum.com/do-yourself-20/how-restore-plastic-3274/
It worked out really well. I was going to attempt to use the heat gun method but I thought that I would try this out first. I have not ridden yet and do not know how well the shine stays after a good muddying up.
Similar threads
