New Skid Plate

[DirtDiggler]

I made this today , front mounts to the lower bumper bolts , need to make a rear mount , do some finish work and drill a oil drain bolt hole .

 

[slickerthanyou]

That looks sweet! Damn there's another mod i have to do! Nice bro!

 

[sillykid]

nice job very clean what did you use to cut the diamond plate?

 

[DirtDiggler]

I used a jiggsaw with a fine cut blade on it had it cut and fitted up in about an hour

 

[badams]

Looks good. I'm going to be making one for my son's outlaw soon. You could bend the ears up and run a peg bolt through it to hold the rear on. I have only used a front and rear mount for years so you should be good. If you don't bend them up I would cut the ears off so they don't get hung up.

 

[DirtDiggler]

I was originally going to bend the ears but they are too short to be able to use the peg bolts so those will get trimmed off and yeah just run a front and rear mount

 

[BLASTY SMURF]

how hard was it to do it looks good bro

 

[stephen12091985]

you can use the conduit hangers to hold the rear up