So I am new to the whole ATV game. I purchased a stock 2001 blaster. I took the Blaster for a ride a few weeks ago and after riding it sounded funny so I checked the trans fluid through the sight tube after I cleaned the window and there wasnt any. So me thinking I’m doing the right thing I add about 1/4 of fluid to fill the sight tube back up between the lines which I use belray 75W. Took it for a ride and 2 mins in it started to pour out thru the tube upfront I’m assuming it’s the overflow. I drained the fluid and changed the head gasket because it was leaking air. Now I took it for a ride and it jus died on me. Idk where to start at with looking or fixing. I just order a paperback users manual and it should be here within a few days. I premix 32:1 and I unplugged the oil injection from the tank. Since the blaster won’t start I was going to install the oil delete Kit I got from vitos. What do I plug the crank case and carb with after pulling the black hose out of the carb? Only other mod is the TORS delete was done. Where do I start?