Hey everyone I’m new to blaster forms but not new to the mechanics world I don’t get to ride much yet but I just got done the majority of my blaster rebuild and am having some jetting issues I think! Here’s what I know off the top of my head!
Exhaust: FMF gold series fatty with powercore2
Airbox: stock box no lid w/ cheap pre oiled filter
Carb: mikuni vm26(pretty sure)
Main Jet: 220
Pilot jet: 32.5
Crank: stock
Cylinder: stock
Head: stock
Reeds: Boysen pro series carbon fiber
Oil pump: stock pump (considering premix)
So it can idle fine with choke off but won’t idle with choke out however it will not really move unless choke is out. The bike just bogs right out when I hit the throttle unless I go extremely slow on the throttle and when I’m at an idle with the choke off and hit the throttle it bogs out unless I nearly touch the throttle so I’m guessing it needs a bigger jet. Any opinions would be appreciated and thanks in advance!!
Exhaust: FMF gold series fatty with powercore2
Airbox: stock box no lid w/ cheap pre oiled filter
Carb: mikuni vm26(pretty sure)
Main Jet: 220
Pilot jet: 32.5
Crank: stock
Cylinder: stock
Head: stock
Reeds: Boysen pro series carbon fiber
Oil pump: stock pump (considering premix)
So it can idle fine with choke off but won’t idle with choke out however it will not really move unless choke is out. The bike just bogs right out when I hit the throttle unless I go extremely slow on the throttle and when I’m at an idle with the choke off and hit the throttle it bogs out unless I nearly touch the throttle so I’m guessing it needs a bigger jet. Any opinions would be appreciated and thanks in advance!!