Need help clutch pushrod stuck

[Devineli]

I have a 01 blaster and the inner pushed welded itself to the ball I have the outer rod out closest to the basket but cannot get the inner rod and ball out have already pulled the clutch actuator out of the top of case but don't know how to get rod and ball out of shaft pls help

 

[bummer981]

You can try tipping it on its side and let gravity be your friend, or blow some compressed air through the hole the clutch actuator goes in.

 

[speedyslyder]

i have heard of people trying magnets/straws as in to grab hold of it and compressed air
or splitting cases good luck.

 

[speedyslyder]

search harder
there is more written search your browser with either with yamaha blaster then your issue or blasterforum
then your issue
better then 1 persons opinion yah think
http://www.blasterforum.com/threads/clutch-wont-engage.60903/
http://www.blasterforum.com/threads/need-clutch-help.54739/

 

[DUALSTROKE]

Bottom line is if you cannot get the inner rod out you will be splitting the cases in order to remove the rod or replace the transmission shaft. If the inner rod is mushroomed at all then it needs to be split.