MSR AOF Clutch Lever and Perch Question

Danbob

Danbob

Member
Mar 12, 2016
10
1
35
26
Hello,

My stock blaster's handle is complete trash. I recently brought the blaster and the previous owner broke the lever and he made a simple fix with a copper pipe and electrical tape. I would just replace the lever but the lever can move up and down freely. Im not just saying foward and backward, like it actually moves up and down alot if that makes any sense. I tried tighten the bolt but I couldnt get it to tighten anymore. Im guessing it has something to do with the perch. I've been looking at the MSR AOF clutch lever and perch. Will I need a new cable for it? Also with this new perch the parking break looks like it will need to be removed and I couldnt find alot of info, does anyone have a link on how to do it?

Thanks
 
If you mean that the brakes are hydraulic then possibly yes. It has the oil for it. But I have a 2004 blaster so the parking break is on the clutch side. My question is if I will need a new cable for the clutch if I get the MSR AOF Clutch lever and perch. I figured out how to remove the parking brake, but Im not sure what cap to get, any advice?
 
changing to any clutch perch besides another stock perch for that 03+ hydro brake setup will invole eliminating the e-brake cable, and losing e-brake capabilities. (I haven't mised my e-brake for years)

you'll need a block off plate for the caliper, pick any one, blaster/banshee are the same.............
http://www.ebay.com/sch/i.html?_fro...a+blaster+emergency+brake+block+off+&_sacat=0

your stock clutch cable should work with any perch, it did on both my MSR and el-cheapo EZ pull perch/handles
 
Awk08 said:
changing to any clutch perch besides another stock perch for that 03+ hydro brake setup will invole eliminating the e-brake cable, and losing e-brake capabilities. (I haven't mised my e-brake for years)

you'll need a block off plate for the caliper, pick any one, blaster/banshee are the same.............
http://www.ebay.com/sch/i.html?_fro...a+blaster+emergency+brake+block+off+&_sacat=0

your stock clutch cable should work with any perch, it did on both my MSR and el-cheapo EZ pull perch/handles
Click to expand...



Awk08 please pm me i want one of you brake set ups for the gsxr conversion also will any perch work thats ez pull ive been looking and there all for dirt bikes can you suggest any good perch and levers?
 
I asked Awk about clutch perch last week. I haven't pulled the trigger on it yet but this is what he sent me:

this one (you may see it listed for a bunch of bikes/atv's)
read the description:
http://www.ebay.com/itm/Honda-TRX25...m33aa99f39a:m:menXzBjp2LkEXLBn2obLHPA&vxp=mtr

I run that on my driveline perfomance HD clucth with 30% heavier springs and its 1-2 fingers EZ all day long !


I also have this cheapy on my spare blaster and it works OK too
http://www.ebay.com/itm/EZ-Pull-Clu...ash=item23567ebf9d:g:FW4AAOxye2lSYFSD&vxp=mtr

Read more: http://www.blasterforum.com/conversations/clutch-lever.64579/#ixzz43B0DSE5t
 
I got it in. Tried to install it yesterday but I couldn't take out the end of the cable from the stock lever. Did anyone have this problem?
 
Danbob said:
I got it in. Tried to install it yesterday but I couldn't take out the end of the cable from the stock lever. Did anyone have this problem?
Click to expand...


I bought a whole set up im going to install later to day bars perch and levers and grips let you know ina few hours when i get out to the farm lol
 
You must log in or register to reply here.

Similar threads

T
Piston Skirt Explosion
Replies
1
Views
308
Engine
RIDE-RED350r
RIDE-RED350r
D
Clutch cable cylinder mount
Replies
1
Views
116
Full Rebuilds
RIDE-RED350r
RIDE-RED350r
T
Bought a blaster project/clutch assembly
Replies
7
Views
593
Engine
Tankbuster
Tankbuster
Nathon
2005 blaster boggs and smokes
Replies
0
Views
114
Engine
Nathon
Nathon
S
Clutch not engaging
Replies
25
Views
1K
Engine
Sub_Blaster
S
Top Bottom
Back