looks like my +4 will be on the way

[yb200]

just the reason to fab up a +4I:I

 

[ATVkid2002]

nice work
fdkigjaqjhfgsdofjha
aofjg;oiajh;flkgjhasfd
gaf;gja;sfgjd;lajhsgojia
gajfg;oasjdgkjaskgha;og
]asdha;osgjho;asjhg;has
]gaosgj;oashf;gdahfgha

 

[blaster01]

nice work
fdkigjaqjhfgsdofjha
aofjg;oiajh;flkgjhasfd
gaf;gja;sfgjd;lajhsgojia
gajfg;oasjdgkjaskgha;og
]asdha;osgjho;asjhg;has
]gaosgj;oashf;gdahfgha

BAHAHAHA there is no work done to it yet...its just a crack in the swinger!.....he is saying he is going to make it a +4 sense its cracked

 

[yb200]

right on.................

 

[ATVkid2002]

lol idk im tired and idk i just wanted to post cause im board

 

[stephen12091985]

nice job you did there to that one.how did you get a crack in it?

 

[yb200]

no idea just was lookin at it and was like whaaaaaaat is that

 

[yb200]

any help or advice on extending mine would be great

 

[specialized7]

get some metal, cut it 4" cut yer swinger in half weld it in there

 

[yb200]

get some metal, cut it 4" cut yer swinger in half weld it in there

i kinda figured that part8-|

 

[yb200]

gunna run to the steel shop and see if i can find some scrap 1x2 tubeing...will that work

 

[stephen12091985]

someone did d.i.y. on how to extend a swingarm

 

[yb200]

someone did d.i.y. on how to extend a swingarm

i cant find it
:-/:-/:-/:-/:-/:-/:-/:-/

 

[stephen12091985]

here doesnt really say how to do it ut here it is

http://www.blasterforum.com/pics-vids-9/just-built-my-new-extended-swing-arm-pics-11227/

 

[yb200]

not a very nice one

 

[tihs]

i am about to start working on one,
here is what i think i am going to do
I cut my swing arm in front of the shock mount.

get a 2 17.25" 1.75"x1" rectangle steel - This is to slide into the swingarm and will touch the front and the back weld that into place, this should make the arm a +4

then get another 1.75"x1" rectangle steel that is about 7" to make a new shock mount - Cut the ends off of it so it looks like an L on both sides and slide that in between the swing arm and weld it into place.

just my idea, all i have done so far is Cut the swingarm, going tomorrow to get the steel.

 

[yb200]

went and got my steel today spend a wopping 4 bucks

 

[kylepotatoes]

Here's doc_speeder's extended swingarm: http://www.blasterforum.com/suspension-14/started-my-diy-4-swingarm-today-14518/
And all his specs for it are on page 4.

 

[tihs]

went and got my steel today spend a wopping 4 bucks

What did you buy?

 

[yb200]

here is what i bought for 4 bucks