It's the plate that the coils go on. It broke in half. I'm probably going to get my buddy to weld the piece back together or get a new plate and move everything over to the new plate.
Thanks! I'm not rel sure how it broke, but luckily it was still bolted on when I took the motor apart. If it would have come loose it could have been bad!!
Before you fit the new stator plate, check for blemishes or protrusions where it mounts, there has to be a high spot which stops the plate sitting in place.
Before you fit the new stator plate, check for blemishes or protrusions where it mounts, there has to be a high spot which stops the plate sitting in place.
That vitos plate is cheap i wouldn't even screw with trying to weld it, its dirty old aluminum, your gonna spend 3 times the time trying to weld it an have so so results, buy the plate an be done