Messed about with different carbs, sick of it now and going back to what I know works the Keihin pj 34 carb
Here's my mods has anyone jetting starting points
Ken oconnor mx ported cylinder
V force 4 reeds
Aluminium airbox
F7 exhaust
66mm bore
Sea level
And importantly a CEL needle I know I should probaly run a DGH but you can't buy them in Ireland and have to order them from US so it takes weeks
Any help would b appreciated, I'm running a standard carb Atm and it's no good the engine seems all revy and not putting the power out and I'm running a 14t front sprocket and a custom 37 rear with the dt200 road bike gearbox which has taller gears
Here's my mods has anyone jetting starting points
Ken oconnor mx ported cylinder
V force 4 reeds
Aluminium airbox
F7 exhaust
66mm bore
Sea level
And importantly a CEL needle I know I should probaly run a DGH but you can't buy them in Ireland and have to order them from US so it takes weeks
Any help would b appreciated, I'm running a standard carb Atm and it's no good the engine seems all revy and not putting the power out and I'm running a 14t front sprocket and a custom 37 rear with the dt200 road bike gearbox which has taller gears
Last edited: