jetting help

[Blaster crazy]

Need advice on jetting running pro circuit header and pipe, k&n air filter, boysen reeds, and no lid

Thanks

 

[Awk08]

not knowing your current temps or altitude, buy 270 thru 310 mains, start large and plug chop down.

float height = 20-21.5mm, stock 32.5 pilot, start with airscrew @ 1.5 turns out, tune in 1/4 turns till you achieve highest idle.
stock needle on middle clip position

plug chops: http://www.blasterforum.com/threads/how-to-plug-chop.53237/

 

[Blaster crazy]

I live on Li

 

[Blaaster]

Leak test before you jet.

 

[Blaster crazy]

Ok

 

[bummer981]

I have pro circuit on two of mine one requires a 270 the other 280. No lid, uni filter and premixing at 40:1

 

[Blaster crazy]

Also where should clip b on needle

 

[jimmu]

Also where should clip b on needle

Middle.

I have pro circuit on two of mine one requires a 270 the other 280. No lid, uni filter and premixing at 40:1

Do you have any porting or head mod on those?

 

[bummer981]

Middle.


Do you have any porting or head mod on those?

When I ran the Pro Circuit with my ported Blaster with the head mod, I ran a 290 and it ripped.

 

[Blaster crazy]

No head mode yet lol

 

[Yamaha1051]

I need help! I have a 200 yamaha blaster bored over 70. I need to know what gas ratio i need to mix my gas at! PLEASE HELP!!!

 

[Blaaster]

As in other thread,

32:1

Plug chop to confirm jetting.

Leak test.

 

[Blaster crazy]

How does this look only has a little black at the tip

 

[Blaster crazy]

Anyone want to know your opinion I personally think it looks pretty good but maybe a jet down

 

[Blaster crazy]

Need a response as soon as possible bc im gonna order jets then

 

[Larry's Shee]

Problem is I see no ring at the base . either didn't do the chop right or something s wrong.

 

[Blaster crazy]

It got smeared while taking old had a light brown ring down low and and a black tip

 

[bdirtrider1]

hey just wondering how you made out with your jetting i have pretty much the same set up except my lid is still on and has 8 1 inch holes with uni filters in them

 

[Yamaha1051]

Hey, is it possible to rig up a blaster with an eletric start? Maybe rig up a battery? Tell me your oppinion. Also is it even possible?

 

[jbuckster07]

Hey, is it possible to rig up a blaster with an eletric start? Maybe rig up a battery? Tell me your oppinion. Also is it even possible?

No, yes, no, no.