Help a girl out!

[motolifeislove]

Final stages of my full rebuild. It's been over a year but I had some set backs. Anyway I'm trying to put swing arm bearings in and I am lost. I have the service manual but everything just looks like circles. Does anyone have a picture of the order they seals and bearings go? Also there's no lip to catch the bearing so where do you press it to? All the way to the inside? Any help would be greatly appreciated! I'm trying to get this thing done this weekend.

 

[82cutty]

Maybe this will help you
http://www.blasterforum.com/threads/rebuilding-a-swing-arm.54922/

 

[motolifeislove]

I was reading that but it really doesn't say how far into it they go.... or anything like that.

 

[82cutty]

I have another swinger I can take a look at . Give me a few minutes

 

[motolifeislove]

Thank you! Maybe a few pics of yours would be great too if you can!

 

[82cutty]

Well on the longer tube the outer bearing it pretty much flush to the outside wall . Inner bearing on the longer tube is in the depth of the seal . Looks about a 1/2 in. On the shorter tube the inner shaft is seized in there so I can't see where the bearings are . I would think it's similar to the longer tube

 

[motolifeislove]

Thank you!

 

[motolifeislove]

I only show there being one bearing though per tube.

 

[Blaster crazy]

 

[82cutty]

My spare swinger is of no help then...missing half the stuff in it lol . Well then on the longer tube the bearing is pretty much flush to the outside wall . Looks like a bushing on the other side of the tube on mine . If I took one apart before I could be of more help to you.

 

[Blaster crazy]

Bearing outside bushing middle and inside seal then sleeve goes in. Also post up some pics of your build

 

[motolifeislove]

I have that break down. Thanks for the help! Guess I'll just have to put it all in and hope for the best.

 

[Blaster crazy]

Remember post some build pics

 

[motolifeislove]

Here's it prior to this swing arm bs. I'm putting the swing arm back in and throwing in a durablue adjustable axle. I just had the motor rebuilt and machined and such. I sh*t you not everything but the steering stem is brand new. I will be upgrading that at a later date.

 

[motolifeislove]

Just did for you sir

 

[Blaster crazy]

Nice quad u got there

 

[motolifeislove]

Nice quad u got there

Thank you!

 

[nick20555]

Here's it prior to this swing arm bs. I'm putting the swing arm back in and throwing in a durablue adjustable axle. I just had the motor rebuilt and machined and such. I sh*t you not everything but the steering stem is brand new. I will be upgrading that at a later date.

I see some elkas on it. NICE!

 

[motolifeislove]

I see some elkas on it. NICE!

It's got elka all the way around. Extended a arms. Wider axle going in it now. Motor work. All new rims and tires xfr nerd bars fmf pipe all new bearings seals swing arm guard. Literally everything is new! My baby! Got damn near 7 grand into it.