The correct torque is 20 ft lbs. My pretty decent quality torque wrench starts at 20 ft lbs. Think I am safe with that?
They only need new pistons and ring, as you said if you don't do it right..My past experience with 2 strokes is they need new piston and rings quite frequently. From lurking here I see that is only the case if you don't do sh*t right. I wanna do sh*t right, LOL.
Bring it up in increments 10, 15, then finish at 20!I convert all the low number torque settings to inch lbs and use an inch lb torque wrench.
ft lbs X 12 = inch lbs.